ZazzleCOM.comHome For Articles

The points you need to know about humidity in data centers are the following: the proper humidity measurement, when humidity is very low, and when humidity is too high.

An information center is the mind of a company since it holds all of the details regarding the operation of that firm. So, the information center should be handled well to maintain optimal condition and keep any kind of concerns at bay. Moisture is one of the most important aspects in maintaining the perfect condition of data centers. Humidity that is either too high or too low could mean the end of your precious information center.

Appropriate moisture measurement

*Relative humidity

The ideal humidity can be confirmed by the relative humidity. Based on several expert engineers, the relative humidity in a well managed data center should be in the range of forty and fifty-five percent. The level of humidity found in the air in comparison to what the air can in fact hold at that same temperature is the relative humidity. This specific humidity will change together with the change of temperature. Nevertheless, the level of air moisture doesn’t really have to adjust together with the relative humidity and also the temperature.

*Dew level

You may even identify the correct humidity for your information center in accordance with the dew point temperature. The dew level temperature is the rating at which the air cools down to the point that the air mass in it will become saturated or turn into liquid water. The right dew point that should be present is from 42 to 59 degrees Fahrenheit.

When humidity is too low

Humidity that’s too low in a data center can cause electrostatic release or simply ESD, that can trigger internal sensors to trip or the electronics program to close down. The proper humidity gives adequate moisture in the air making it electronically conductive. This electronically conductive air then minimizes the danger of power discharge since the imbalance of the negative and positive charges which make these damaging discharges is lessened. Electrical discharges could cause harm to data center equipment. Cool and low humidity air that moves around the data center may cause static electricity, that can also result from individuals travelling the location or from the movement of furniture. This air humidity and temperature must be well-controlled to prevent creating any damage as it moves through ungrounded and covered surfaces. Experts also declare that a relative humidity below 35 % is the point at which damage to computing equipment can start to occur.

When humidity is too high

High humidity, on the other hand, could lead to the accumulation of water. The existence of water can decrease the chances of static electricity, but we also realize that electronics and water do not mix. This is because of the corrosive impact that water can have on metallic things, which will lead them to fall short in their work. Water which condenses inside computer components can also trigger an energy shortage or cause a fuse to inflate or damage circuit parts. You also need to understand that in case the temperature of the data center becomes too low, it will improve the condensation of water. As the ability of the air to carry humidity is reduced, it’ll lead to the visible presence of water inside the information center.

Now that you are aware of the importance of the ideal degree of humidity in your information center, you need to have the very best air temperature and also humidity measuring tools so that you can sustain the maximum level of humidity all the time. Buy the best measuring device you can afford.

Written by Ella B. Spada. If you wish to find out more, click on managed data center